Wednesday, June 27, 2012

CEDAR PLANK HEADBOARD

A few days ago I posted some headboard photos I really liked with the goal of creating one of them for our bedroom.  After my little blogging hiatus, I'm learning all over again that a blog is a good device for getting your projects done!  Blog about it and you've kind of committed to it, so it forces you to get up and get going!

I love the combination of rough horizontal cedar planks and curves.  You can achieve a look that's pretty and curvy, but keeps a more rustic touch with the rough cedar.  Painting the end product kind of encases all those rough edges so it's not at all "pokey".  

So, to get started, I picked up 8 pieces of cedar fencing, got out some newspaper to make a pattern, and got going.  First I made a pattern for a curvy headboard - you'll want to make just one half of the design.  You can trace the design onto one half of the boards and then flip it to do the other half. 
  So just tape several pieces of newspaper together to get the size you need and start designing!
 Once the newspaper pattern is cut out, then lay out your cedar boards on a flat surface.  On top of that, lay a piece of plywood or hardboard.  I had to use two pieces of hardboard - each 2' x 4' because a full 4' x 8' sheet won't fit in my little car.  Then start tracing out your design.
 As you can see, due to my smaller backing boards, the sides of the headboard are missing the backing.  Once I get the shape of the headboard all cut out, I can use the backing scraps to fill in the these areas.  
 The backing gets nailed down to the planks every couple inches.  Make sure your nails are long enough to go into the cedar planks, but not so long that they poke through the other side!!!  
 Then using a blade for curvy cuts, use a jigsaw to cut out around the line you've drawn.  The right blade makes all the difference.  You'll only get frustrated if you try to use a blade meant for straight cuts to do this.  The right blade in your jigsaw will cut right around those curves like butter.
 Here's a picture of the back of the headboard with the scraps all cut to fill in those side areas.
Then to paint it . . .
I painted kind of sparingly to give it more of a worn look.
 For hanging, I used something I saw somewhere on the internet but I don't remember where.  I took a board about 24" wide and used my jigsaw to cut it in half - on an angle - the long way.  I'm sure there's an official name for this but I don't know what it is.  Adhere one half to the back of the headboard - make sure the angled edge is at the top and that it angles down, from top to bottom. The other piece is attached to the wall in such a way that the headboard just slides down on top of it and the two pieces lock together.  Does that make sense???


Then, I sweetly asked my husband to help me hang it on the wall - an interesting little bit of cooperation on a very hot and humid summer afternoon.  He's such a good sport helping out with all of my ideas - but it probably would have been better to attempt this on a nice cool morning.  After lots of measuring . . . and measuring . . . and measuring . . . we got it on the wall.  Evenly.  I love it!  It's the perfect rustic, curvy headboard I was imagining!

(He really likes it too!)

By day . . .
And by night . . .


Thanks for stopping by!

Sharing on:
Funky Junk Interiors











7 comments:

Diane said...

Absolutely terrific Nan! I really love how you pieced all the cedar together. It looks great with the bed!

TracyMB @ Crows Feet Chic said...

I love the contrast of the curvies with the rough planks! I'm so impressed that you drew your own pattern too... I'm never that brave. Awesome job. Glad you're still married after that high temp & humidity episode! :)

Anne said...

Nan,
WOW looks amazing!!!! Love the rustic look.I need to get some tools so I can try this too!
((((Hugs)))
Anne

ordinarycreative.wordpress.com said...

So excited you are back! Awesome project and result. I just bought a jigsaw so I will pull it out of the box and get busy with a project I have in mind.

Fellow Wisconsin creative suffering in the heat!

Best,
Debbie

Hooked on Decorating said...

Nan, you did an incredible job! I could have never drawn out that pattern let alone feeling comfortable cutting it out. Way to go! I believe the type of wall bracket you are talking about where you have two angled boards together is what is called a cleat.

Thanks for sharing!

Cheryl in Wisconsin said...

Very impressive. I love the finished look.

Funky Junk Interiors said...

This is such a fabulous project and tutorial Nan! I adore the texture of the headboard against that very wall. Gorgeous design! And love how easy it appears to be to make. All the makings for a perfect feature. :)

Shared all over the land for SNS 168 at:

https://www.facebook.com/photo.php?fbid=10151325650461141&set=a.192514281140.164586.175378011140&type=1

YOU COULD MAKE THAT IS ON FACEBOOK!

LinkWithin

Related Posts Plugin for WordPress, Blogger...